Home Screen - Alcatel One Touch Scribe HD 8008X User Manual

Charging the battery
Connect the battery charger to your phone and mains socket respectively,
then the charging status bar will float.
• Make sure the battery is correctly inserted before connecting the
charger.
• When using your telephone for the first time, charge the battery fully
(approximately 5 hours).
You are advised to fully charge the battery (
indicated by the percentage on screen while the phone is powered off. The
percentage increases as the phone is charged.
The charging status bar will not float if your battery is extendly
consumed. To reduce power consumption and energy waste, when
battery is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when not
in use; reduce the backlight time, etc.
1.2.2 Power on your phone
Hold down the Power key until the phone powers on, unlock your phone
(Slide, PIN, password or pattern) if necessary and confirm. The Home
screen is displayed.
If you do not know your PIN code or if you have forgotten it, contact your
network operator. Do not leave your PIN code with your phone. Store
this information in a safe place when not in use.
). Charging status is
19
Set up your phone for the first time
The first time you power on the phone, you should set the following
options:
Get started..., then select the phone's language.
• Touch
• The device will search for service by itself. The process of activation will
take a few minutes.
• There is an notice about magnetism sensitive, touch
• Select your input keyboard, then touch
• Set your date and timezone, you can also choose
then touch Next.
• Setup your Google account
a Google Account, touch Sign in, then enter your user name and
password. If you forget your password, you can go to http://www.
google.com/ to retrieve it. If you don't own a Google Account, you are
prompted to create one by touching Get an account. Touch Not now
to skip to the next step.
• Touch Next ,then the Setup complete screen will display, touch Finish
to confirm.
When the phone is powered on, you can connect to a Wi-Fi network,
without a SIM card inserted (refer to section "6.1.2 Wi-Fi"), to sign into
your Google account and to use some features.
1.2.3 Power off your phone
Hold down the Power key until the pop-up menu appears, select Power
off, and touch OK to confirm.
Next.
Next.
Automatic time zone,
: Touch Set up now. If you have
20