Table of Contents
Advertisement
Maintenance Minder
Your dealer will reset the display
after completing the required
maintenance service. You will see
''OIL LIFE 100%'' on the display the
next time you turn the ignition
switch to the ON (II) position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:
1.
Turn the ignition switch to the ON
(II) position.
2.
If the oil life minder is not
displayed, press the SEL/RESET
button on the steering wheel
repeatedly until it is.
352
U.S.
CANADA
3.
Press and hold the SEL/RESET
button on the steering wheel for
more than 10 seconds. The
remaining engine oil life reset
mode will be shown on the multi-
information display.
To reset the engine oil life, press
the
or
button on the steering
wheel to select RESET on the
display, and press the SEL/
RESET button.
To cancel resetting the oil life,
press the
or
button on the
steering wheel to select CANCEL
on the display, and press the SEL/
RESET button.
If you do not complete the reset
procedure within 30 seconds after
selecting the reset mode, the mode
will be canceled automatically.
If you have the required service
performed but do not reset the
display, or reset the display without
performing the service, the system
will not show the proper
maintenance intervals. This can lead
to serious mechanical problems
because you will no longer have an
accurate record of when
maintenance is needed.
Advertisement
Chapters
Table of Contents
