Setting Preferences; Communication Port; Selecting The Default Calculator And The Default Communication Port; Connecting Automatically At Startup - Texas Instruments TI-GRAPH LINK 2 Manual Book

Setting Preferences

Selecting the
Default
Calculator and
the Default
Communicatio
n Port
Connecting
Automatically
at Startup
Note: To open a
calculator
connection at any
time (using the
default calculator
and the default
communicaiton
port), use the Quick-
Connect feature.
Press "+K .
20 TI-GRAPH LINK 2 for Macintosh
Using the Preferences
your TI-GRAPH LINK environment.
To select the default calculator and the default

communication port:

1. Open the Edit menu and click
2. From the drop-down list, select
3. In the Default Calculator
want to set as the default.
4. In the Default Comm Port
want to set as the default.
5. Click OK .
To set TI-GRAPH LINK so that a calculator connection
opens automatically when you start TI-GRAPH LINK:
1. Open the Edit menu and click
2. From the drop-down list, select
3. Select Open Connection to Default Calculator
click OK .
If the default selections do not match the connected
calculator or the communication port you are using, a
Connection Failure
feature, you can select settings for
Preferences
General
line, select the model that you
line, select the port that you
Preferences
Startup
error will occur at startup.
.
.
Drop-down
list
.
.
and