Table of Contents
Advertisement
Record
26
Record with your video recorder without EasyLink
Ext2 Output
To record S-VHS quality, connect an S-VHS peripheral directly to the video
recorder.
In this case go on as follows:
Select
in the
Setup
INSTALLATION
Select
with the cursor up/down.
Ext 2 Output
Select
S-VHS Quality
In all other cases, whether you record with a VHS or a S-VHS video recorder,
select
.
VHS Quality
Press one of the colour menu keys on the door of the remote control
repeatedly to switch the menu off.
Record a TV programme
Select the programme number on your video recorder.
Set your video recorder to record.
See the handbook for your video recorder.
Switching programme numbers on your TV does not disturb recording !
Record a programme on your video recorder connected to
from Audio/Video equipment connected to
EXTERNAL 2
,
EXTERNAL 1
EXTERNAL 3
receiver
Switch on the equipment.
Select the correct external on your video recorder.
Set your video recorder to record.
You record what you are watching on the screen.
Do not switch programme numbers or do not switch off your TV when you are
recording !
menu and press the OK key.
with the cursor left/right.
or to sockets on the front side of the
Advertisement
Table of Contents
