Table of Contents
Advertisement
CABLE
EXTERNAL
2
1
2
4
VCR 1
EXTERNAL
CABLE
1
4
3
2
VCR 1
Connect Peripheral equipment
20
Connect Peripheral Equipment
Video recorder
3
DECODER
Video recorder and other peripherals
1
2
5
There is a wide range of audio and video equipment that can be connected
to your receiver.The following connection diagrams show you how to
connect them to the back or the front side of the receiver.
Note: in case of the monitor in a stand alone situation without the receiver box
connected, see the instructions with the monitor.
Note: Do not place your video recorder too close to the screen as some video
recorders may be susceptible for signals out of the display. Keep a minimum distance
of 0.5 m to the screen.
Connect the supplied aerial cables
quality, a eurocable
as shown opposite.
If your video recorder is provided with the EasyLink function, the eurocable supplied
with it, should be connected to
Only if you do not connect the eurocable
Search for and store the test signal of the video recorder
Unplug the aerial cable
Switch on your TV and put the video recorder on the test signal.
(See the handbook for your video recorder.)
Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual Installation, p. 6.
Store the test signal under programme number 0 or between 90 and 99.
Replace the aerial cable in the aerial socket
you have stored the test signal.
Decoder and video recorder
Connect a eurocable
to your decoder and to the special euroconnector
of your video recorder. See also the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 8.
You can also connect your decoder directly to
eurocable.
Connect the aerial cables
quality can be obtained if you also connect eurocable
and a eurocable
to
EXTERNAL 1
Look for the test signal of your peripheral in the same way as you do for a
video recorder.
When a video recorder is connected to
programme from your TV.
Only when a video recorder is connected to
programme from your TV as well as from other connected equipment. See Record
with your video recorder, p. 26.
Note:
can handle CVBS and RGB,
EXTERNAL 1
only CVBS.
EXTERNAL 3
,
and, to obtain a better picture
to benefit of the EasyLink function.
EXTERNAL 2
, you have to do the following :
from the aerial socket
of your video recorder.
of your video recorder after
EXTERNAL 1
,
and
as shown opposite. Better picture
or
.
3
you can only record a
EXTERNAL 1
it is possible to record a
EXTERNAL 2
CVBS,Y/C and RGB,
EXTERNAL 2
or
with a
2
to
EXTERNAL 2
Advertisement
Table of Contents
