Table of Contents
Advertisement
1
2
3
n
L
AUDIO OUT
R
2
1
Camera & camcorder
Headphone
Dolby Pro Logic Surround receiver
SURROUND
SOUND CENTRE IN
Connect your camera or camcorder at the front side of your receiver.
Connect the equipment to
VIDEO
equipment.
For stereo equipment also connect
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS
cables with the
input
S-VHS
Insert the plug into the headphone socket
receiver.
Press
to switch off the internal loudspeakers of the TV.
The headphone impedance must be between 8 and 2000 Ohm.
The headphone socket has a 3.5 mm jack.
In the
menu select
SOUND
balance and to select the audio source for your headphone sound. See p. 14.
Connect the audio cable to the Dolby Pro Logic Surround receiver and to
and
at the back of your receiver box
AUDIO OUT L
R
If you want the loudspeakers of your monitor to act as centre speaker, also
connect an audiocable to the Dolby Pro Logic Surround receiver and to the
SURROUND SOUND CENTRE IN
box
.
Select
in the Setup menu. See p. 9, or switch
Centre mode On
with the white colour key on the remote control.
On
In the Sound menu only the volume menu item can be controlled.
The loudspeakers of the monitor will now only produce centre sound, the
loudspeakers connect to the audio receiver will produce Surround Sound.
If you want to connect more equipment to your receiver, consult your dealer.
Connect Peripheral equipment
and
AUDIO L
.
AUDIO R
and
inputs
.
AUDIO
at the front side of the
to adjust the headphone volume and
Headphone
at the back of your receiver
for mono
.
Centre Mode
21
Advertisement
Table of Contents
