Advertisement
S
Timer Recording Using the
G-
By entering the G-
GUIDE CHANNEL SET UP
TV programme, you can easily programme a
GUIDE CH
USER CH
254
--
timer recording.
255
--
01
05
02
02
1
03
03
SELECT:
OR 0-9
CONFIRM: OK
END: TIMER
1 Press VCR.
2 Press TIMER.
3 Press PLAY
2
1 Press Number
2 Press OK/STATUS.
• If "ERROR-RE-ENTER CODE" appears on the TV,
• If you have not yet set the user channel, the "GUIDE
3
Press ALT/SPEED.
• Each time you press the button,
• To change the stop time, press STOP +/– (number 2
4
Press OK/STATUS or TIMER.
"PROGRAM WAS COMPLETED" appears on
the TV screen.
After 5 seconds, the above message disappears,
and the normal TV picture resumes. The
(timer) indicator lights up on the display.
620/75
System
CODE
number for a particular
CODE
Select G-
Mode
CODE
G-CODE PROG.
5
∞
or STOP
to select"G-
" then
CODE
press OK/STATUS.
END: TIMER
The G-
entry menu appears on the TV
CODE
screen.
Enter G-
Number
CODE
G-CODE PROG.
buttons to enter the
G-
number assigned to
CODE
the TV programme you
CONFIRM: OK
want to record.
CORRECT: CLEAR
END: TIMER
G-
you have entered an incorrect
CODE
this happens, press CLEAR to erase the number, then
enter the correct number.
CHANNEL SET UP " screen will appear. Press
5
∞
PLAY
or STOP
buttons repeatedly or number
buttons to enter the USER CH number which the
G-
broadcast for the
number is received on the
CODE
VCR, then press OK/STATUS.
Select Tape Speed
ONE TIME PROGRAM
PROGRAM
CHANNEL+/–
START +/–
the tape speed alternates bet-
STOP +/–
REC SPEED LP
ween "SP", "LP", or "SLP".
DATE +/–
SP, LP : For PAL signal
DAILY: 8
CONFIRM: OK
SP, SLP : For NTSC signal
or 5 button).
Confirm Programme
21
• If "PROGRAM NOT COMPLETED" appears, try
again from step 1.
• If "PROGRAM OVERLAPPED" appears, the timer
recording you just programmed overlaps another
timer recording. The Program Review screen will
appear with a magenta line blinking. To change any
item on the overlapping programs, see page 23.
If you want to store other programmes, repeat
steps 1 to 4.
5
NO.
Finish the Settings
Press POWER to turn off the VCR.
The VCR must be turned off for a timer recording
to take place. If you forget to turn off the VCR,
"PLEASE TURN OFF VCR FOR TIMER
RECORDING" flashes on your TV screen two
minutes before a timer recording starts. To
remove the message, press the CLEAR button.
NO.
123
If you want to record the same programme
daily, press DAILY (Number button 8) at step 3
(Press the button again to cancel).
The VCR will record a TV programme every day
(Monday through Friday) at the same time and
length. (Daily Recording)
number. If
If you want to record the same programme
weekly, press WEEKLY (Number button 9) at
step 3 (Press the button again to cancel).
The VCR will record a TV programme once a
week at the same day, time, and length. (Weekly
Recording)
If you want to cancel the currently set pro-
gramme, press CLEAR button.
Note:
• Even if a power failure occurs, the VCR keeps your
timer programs. However, the clock time and other
1
12
menu settings are lost if it lasts for more than 3
08 : 00 PM
10 : 00 PM
minutes. As a result, when the power is supplied
– –/– –/– –
again to this VCR after the power failure, set the
WEEKLY: 9
clock time and turn off the VCR.
END: TIMER
Each timer program you have made will start unless
its start time already passes.
-21-
01.5.11, 4:42 PM
Advertisement
