AMD ATI Radeon HD 3400 Series User Manual page 16

10
Caution:
Remember to discharge your body's static electricity by touching the
power supply case or the metal surface of the computer chassis.
4.
Remove any unneeded graphics cards from the computer.
Warning:
Some graphics cards can get hot while operating. Wait approximately five
minutes after turning off the computer before touching the card.
5. Locate the PCIe® slots on the motherboard. If necessary, remove the
corresponding back panel cover.
6.
Align the new graphics card in the PCIe slot and press firmly until the card
is fully seated.
Figure 2–1 Graphics Card Installation
7. Fasten the graphics card securely to the back panel.
8.
Make sure the cables are not interfering with anything inside the computer
(for example, a cooling fan) and then replace the computer cover.
9. Reconnect any cables you have disconnected and plug in the computer
power cord.
10.
Turn on the monitor and then the computer.
You now need to enable ATI CrossFireX in ATI Catalyst Control Center.
ATI Radeon HD 3400 Series
ATI CrossFireX
© 2007 Advanced Micro Devices, Inc.