Table of Contents
Advertisement
➭
Searching the Help
1. Click Help in the Dashboard.
2. Click Search Help.
3. Enter the word(s) you wish to search for the in search box of the
ATI Catalyst Control Center Help.
4. Click Go.
Troubleshooting
Note: Some troubleshooting tips may not be applicable depending on the display
options supported by and configured for your card.
Graphics Card Installation Troubleshooting
For more advanced troubleshooting information, contact AMD Customer Care
for ATI products at ati.amd.com.
The graphics card doesn't fit any of the motherboard slots.
The graphics card needs to be exchanged for one with a bus that matches the
motherboard.
The computer beeps and the boot process stops.
Make certain that the graphics card is properly connected to the internal power
supply and the motherboard.
No display on power up.
This may be an SBIOS issue. Replace the old card and then try these possible
solutions:
1.
Check the motherboard manufacturer's Web site for an SBIOS update.
2.
Turn off the on-board video.
The computer does not boot up properly.
Verify that the installation instructions were followed correctly.
Make certain that the graphics card is properly connected to the power supply
and the motherboard.
© 2009 Advanced Micro Devices, Inc.
To access AMD's Web site, from either the Help or Options ▷ Help
menu, choose Go to ATI.com.
Searching the Help 11
ATI Radeon HD 5450
Hide quick links:
Advertisement
Table of Contents
