Haier HLF103Q User Manual page 10

Various button initial status for "Normal program"
Cycle Signal Softer
Off
Wrinkle Care
Normal
Cycles
Nixie display Indicate current program remaining time
High
Temp
sensor Dry Level More Dry
Auto-program
Timed/Cycles
2. Press "Auto-Dry Cycles" button to select a suitable full automatic cycle
The Normal program will be automatically selected after powering on. If other
full automatic program is desired, press "Auto-Dry Cycles" button
until corresponding indicator turns on.
To select your desired settings the "Custom" function should be chosen.
It can memorize programs defined by user and display the previous program
upon next application of this function.
Use details are as follows:
After powering on, press "Auto-Dry Cycles" until"Custom" status, then set
"Timed-Dry Cycles" to Timed Dry or Rack Dr y, and set status of other buttons.
Press "Start/Pause" button or after half a minute, the program defined by
user himself will be stored and will be directly displayed upon next use.
Notes: Pressing "Sensor Dry Level" button will be inactive during use of
"Custom" function.
8
Normal Casual
Heavy
Delicate
Cotton
Touch Up
Bulky Items
Custom
t o -
Aut o -D ry
C l e s
Cycl e s