Table of Contents
Advertisement
(2) Configuring SATA controller mode and boot sequence in BIOS Setup
You have to make sure whether the SATA controller is configured correctly in system BIOS Setup and
set BIOS boot sequence for the SATA hard drive(s).
Step 1:
Turn on your computer and press the Del key to enter BIOS Setup during POST (Power-On Self Test).
To use the SATA controller, assure that the On-Chip SATA item under the Integrated Peripherals menu
is set to Auto or Manual. Set SATA RAID Function to Enabled if you want to create RAID (Figure
1). Set the option to Disabled if you do not want to create RAID.
: Move
Enter: Select
F5: Previous Values
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
F10: Save
Figure 1
- 3 -
SATA Hard Drive Configurations ( Intel ICH5R)
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
