Table of Contents
Advertisement
IDE2 Conductor Cable
Auto
Will be automatically detected by BIOS. (Default Value)
ATA66/100
Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE
device and cable is compatible with ATA66/100).
ATA33
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device
and cable is compatible with ATA33).
On Board FDC
Auto
Set On Board FDC is Auto (Default Value).
Disabled
Disabled On Board FDC
Enabled
Enabled On Board FDC
Onboard Serial Port 1
Auto
BIOS will automatically setup the port 1 address (Default Value).
3F8/COM1
Enable onboard Serial port 1 and address is 3F8.
2F8/COM2
Enable onboard Serial port 1 and address is 2F8.
3E8/COM3
Enable onboard Serial port 1 and address is 3E8.
2E8/COM4
Enable onboard Serial port 1 and address is 2E8.
Disabled
Disable onboard Serial port 1.
Onboard Serial Port 2
Auto
BIOS will automatically setup the port 2 address (Default Value).
3F8/COM1
Enable onboard Serial port 2 and address is 3F8.
2F8/COM2
Enable onboard Serial port 2 and address is 2F8.
3E8/COM3
Enable onboard Serial port 2 and address is 3E8.
2E8/COM4
Enable onboard Serial port 2 and address is 2E8.
Disabled
Disable onboard Serial port 2.
OnBoard Parallel port
378
Enable On Board LPT port and address is 378.
278
Enable On Board LPT port and address is 278.
3BC
Enable On Board LPT port and address is 3BC.
Auto
Set On Board LPT port is Auto. (Default Value)
Disabled
Disable On Board LPT port.
GA-7VKMLS Motherboard
- 44 -
Advertisement
Table of Contents
