Step 2: Install Memory Modules - Gigabyte GA-8GEM667 Series User Manual

Step 2: Install memory modules

The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM socket
.The DIMM module can only fit in one direction due to the notch. Memory size can vary between
sockets.
Total Memory Sizes With Unbuffered DDR DIMM
Devices used on DIMM
64 Mbit (2Mx8x4 banks)
64 Mbit (1Mx16x4 banks)
128 Mbit(4Mx8x4 banks)
128 Mbit(2Mx16x4 banks)
256 Mbit(8Mx8x4 banks)
256 Mbit(4Mx16x4 banks)
512 Mbit(16Mx8x4 banks)
512 Mbit(8Mx16x4 banks)
DDR1 DDR2
S S
D S
D D
D X
S D
S X
D:Double Sided DIMM S:Single Sided DIMM
X:Not Use
! !
! ! When STR/DIMM LED is ON, do not install/remove DIMM from socket. !
! ! ! Please note that the DIMM module can only fit in one direction due to ! !
the two notches. Wrong orientation will cause improper installation.
Please change the insert orientation.
GA-8GEM667 Series Motherboard
1 DIMM x 64 / x 72 2 DIMMs x 64 / x 72
128 MBytes 256 MBytes
32 MBytes 64 MBytes
256 MBytes 512 MBytes
64 MBytes 128 MBytes
512 MBytes 1 GBytes
128 MBytes 256 MBytes
1 GBytes 2 GBytes
256 MBytes 512 MBytes
1. The DIMM socket has a notch, so the DIMM memory
module can only fit in one direction.
2. Insert the DIMM memory module vertically into the
DIMM socket. Then push it down.
3. Close the plastic clip at both edges of the DIMM
sockets to lock the DIMM module.
Reverse the installation steps when you wish to
remove the DIMM module.
- 12 -
DDR