1. Press "MENU" button.
2. Select "Picture" by using "CHANNELx x " button.
Picture : Dynamic
Brightness
50
Contrast
90
Sharpness
75
Color
50
Tint
50:50
Picture NR
Off
Move
Adj
Prev
3. Press "CHANNELx x /y y " buttons.
Picture : Dynamic
Brightness
50
Contrast
90
Sharpness
75
Color
50
Tint
50:50
Picture NR
Off
Move
Adj
Prev
4. Press "MENU" button twice.
•Press this button one time, and the menu window appears.
Press it again, and you will get the previous status of the menu window.
(Menu disappears)
•The screen appears as follows :
•Move the cursor to the "Picture" menu by using
"CHANNEL x" button.
•When "Picture" mode is selected, its sub-menu
appears on the screen.
•Continue to press "CHANNELx/y" buttons, and the
entries of this sub-menu turn blue in the sequence as
follows : Brightness
Contrast
Color
Tint
•Select "Picture NR" function by using "VOLUMEC/B"
buttons, and then, "On" and "Off" repeat in turn.
•Select "On".
Picture Noise Reduction
Sharpness
Picture NR
LLow transmission signals may cause
bad picture or noise.
LThis function corrects this type of
problem.
LTo eliminate or reduce picture noise,
press to select "On" in "Picture NR"
mode of "Picture" sub-menu.
20