Table of Contents
Advertisement
Automatic Memory of Channel
LActual broadcasting channels can be
set up in the "Memory" of the TV set
through this function.
With an automatic channel setup
memory, desired channels can be
selected easily with "CHANNELx/y"
buttons. Such inconvenience as
pressing channel numbers one by
one is not necessary.
LMENU mode automatically
disappears in 20 seconds when
there is no button operation. If you
want to get out of the Menu mode
yourself, press "MENU" button
several times.
LWhen setting up an automatic
channel memory, only the channels
with a signal get memorized. The
other channels go into erased status.
LWhen a TV program is on the signal,
"Air" appears on the screen; while
CATV program is on the signal,
"Cable TV" appears on the screen.
Select the desired Source by using
"VOLUMEB" buttons to set up the
Automatic Channel Memory.
13
1.Press "MENU" button.
2.Select "Set Up".
3.Select Auto Program by using "CHANNELx x /y y " buttons.
Set Up
Reception
Air
Auto Program
(
Ch Edit
Move
Sel
Prev
•The main menu will appear.
•Move the cursor to the "Set Up
VOLUMEC/B
buttons.
"
"
•Select "Set Up
sub-menu by using
"
button.
•The following picture will appear on the screen
•Use "CHANNELx/y" buttons to select Auto
Program.
menu by using
"
CHANNELx
"
"
Advertisement
Table of Contents
