Table of Contents
Advertisement
DAILY USE
SELECTING A PROGRAMME NUMBER
The set has a total of 70 programme numbers, 0..69.
The NUMBER button 0..9 are used for direct programme
selection.
In order to select two-digit programm, press the second num-
bered button within two seconds.
Switch through the programme number step by step with the
UP/DOWN button.
VOLUME AND PICTURE CONTROL
VOLUME CONTROL
Adjust the volume with the VOLUME (
on the front of the set, or with the LEFT/RIGHT button on the
remote control.
MUTE
Pressing the MUTE button (
The sound returns if the button is pressed once more or the pro-
gramme no. is changed.
NORMAL PICTURE SELECTION
When you press the NORMAL button repeatedly you can call up
three picture settings'
for NORMAL I(hard picture), NORMAL II(soft picture),
FAVOURITE (adjustable picture).
PICTURE CONTROL
Press the MENU button to call up the MAIN MENU.
Press the OK button to call up the PICTURE menu.
You can select each function with the UP/DOWN buttons.
Use the LEFT/RIGHT button adjust each function:
BRIGHTNESS(
)-COLOUR(
NESS(
)-TINT(
).
* The TINT is active only in NTSC system.
The last set value is automatically stored in FAVOURITE mode.
Note that if you set the brightness and contrast values too low,
the On-screen-display become dark.
) DOWN/UP buttons
) once turns the sound off.
)-CONTRAST(
)-SHARP-
PICTURE
31
31
63
31
00
7
Hide quick links:
Advertisement
Table of Contents
