Table of Contents
Advertisement
C H A P T E R
Connecting an Antenna or Cable to Y our TV
Your TV will provide you with the best performance if you connect it to an external antenna or cable sys-
tem. Follow the directions below make this connection. Please note that you will normally only have to
make one of the connections shown below, not all of them.
All connections will be made to the antenna terminal on the back of your TV. The antenna terminal is a
silver metal post partially surrounded by two plastic tabs. For help in locating the antenna terminal, see
Your TV's Back Panel on page 5.
Connecting an Antenna
If your antenna ends in a pair of 300 ohm twin leads,
adapter(available at your local electronics store). Place the leads underneath the screws on the adapter,
tighten the screws, then press the adapter onto the antenna terminal on the back of the TV.
8
Chapter 2 : Connecting an Antenna or Cable to Your TV
2
If your antenna ends in a single coaxial lead,
press or screw the cable onto the antenna terminal on the
back of your TV.
you must use a 300-ohm/75-ohm
simply
Advertisement
Table of Contents
