Daewoo DPP-4270NHS User Manual page 54

• "
" button
AV1
TV
• "
MULTIMEDIA" button
Component1
DVI
NOTES:
1) If an external device is not connected or INPUT signal is not
applied, Warning Message ("No Signal") would be displayed.
2) In this case, check if external device is connected and/or
terminal connection is properly done.
3) Also, you can select input using [INPUT SELECT] button in
the keypad of the PDP unit. The sequence of selection is as
follows:
AV1 --> AV2 --> AV3 --> TV --> PC --> DVI -->
Component1 --> Component2 --> AV1
AV2
AV3
Component2
PC
Component 1
55