Input Select - Daewoo DPP-4270NHS User Manual

3

Input Select

• Select [Component 1 or Component 2] by
pressing the "Multimedia" button of the
Remote Control or using the "INPUT SELECT"
button of the PDP unit.
• Each time you press the "Multimedia" button,
different input modes appear. The sequence is
as follows:
4
NOTES:
1) Possible Digital Broadcasting signals: 1080i, 720p, 480p.
2) Antenna Connection:
Apartment : Check if communal aerial receives digital broadcasts.
Private Houses: Set the indoor/outdoor UHF antenna to the direction
of the digital broadcasting transmitting company.
3) For detailed connection method, refer to the Owner's Manual of Digital
Broadcasting Receiver.
4) What is a component? : Signals with which luminance and
chrominance are separated, producing a sharp picture.
5) If the Digital Broadcasting Receiver has PC Output terminal or DVI
Output terminal, connect to 'PC INPUT' or 'DVI INPUT' at the back
panel of the PDP.
When watching the PDP by PC or DVI Input, some undesired signals
may be seen at the top and bottom area of the screen. In this case,
select [Menu] --> [Screen] --> [V. Size] to adjust.
Component1
PC
Select a Desired Channel and Function
• Select a desired channel and function by
using the Remote Control of the Digital
Broadcasting Receiver.
Component2
DVI
25