Changing The Tv's Input; Changing The System - Daewoo DTH-29MS Instruction Manual

Changing the TV's Input

Normally, your TV displays the signal coming through the antenna terminal. However, If you've
connected another component to your TV(such as a VCR) using the Video/Audio input, you will
want to be able to view the signal from the component.
To do this, you will need to switch from the 'TV' input to the 'Line' Input, as follows.
1 With the TV on, press the MENU button twice, then "Set-Up" menu will appear.
2 Use the V V CHW W buttons to select "Input".
3 Press the C C VOLB B buttons to change from 'TV' to 'Line1, Line2'.
4 Wait 10 seconds, or press the MENU button to return to normal TV viewing.
1
Set-Up
Language :
Reception :
Memorize Channels
Add/Delete Channels
Input :
Select
When it connected an Video/Audio cable from the Video/Audio out jack on the VCR to the
Video/Audio in jack on the front your TV, and your TV's back panel at the same time, the for-
mer takes precedence of the latter.
14
Chapter 3: Operating Your TV
2
Set-Up
English
Air
TV
Adjust Next
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input : TV
Select Adjust Next
3
Set-Up
Language : English
Input : Line 1
Select Adjust Next