Connecting A Cable System - Daewoo DTH-29MS Instruction Manual

Antennas with two sets of leads
You might have two sets of leads from your antenna system, especially if you have one antenna
for VHF signals and one antenna for UHF signals.
If your antenna system has both a coaxial lead and twin 300-ohm leads
obtain a combiner (available at your local electronics store). Press or screw the coaxial lead onto
the combiner; place the twin leads underneath the screws on the combiner and tighten the
screws. Press the cable from combiner onto the antenna terminal on the back of your TV.
If your antenna system has two sets of twin 300-ohm leads
(available at your local electronics store). Place one set of twin leads underneath the screws on
the combiner and tighten the screws. Do the same with the other set of twin leads. Press the
cable from the combiner onto antenna terminal on the back of your TV.

Connecting a cable system

If your cable set-up is not described below, please
contact your cable company for more information.
If your cable system does not require the
use of a cable box
incoming cable onto the antenna terminal on the
back your TV.
Chapter 2 : Connecting an Antenna or Cable to Your TV
, you must
, you must obtain a combiner
, simply press or screw the
9