Connecting Other Pieces Of Equipment; Safety Note - Daewoo DTH-29MS Instruction Manual

If your cable system requires you to use a converter box for all channels
incoming cable to the IN terminal on the converter box. Connect another cable between the
OUT terminal on the converter box and the antenna terminal on the TV. You will need to keep
your TV tuned to channel 3 or 4 and change channels using the converter box.
If your cable system only requires you to use a converter box for some channels (i. e.
pay-TV channels)
cable into a splitter (available at your local electronics store). Connect one coaxial cable
between one OUT terminal on the splitter and the IN terminal on the converter box. Connect
another coaxial cable between the other OUT terminal on the splitter and the B-IN terminal on
an A/B switch (available at your local electronics store.) Connect a third coaxial cable between
the OUT terminal on the converter box and the A-IN terminal on the A/B switch. Finally, con-
nect a coaxial cable between the OUT terminal on the A/B switch and the antenna terminal on
the back of your TV.
When the A/B switch is in the A position, you need to change channels on the converter box
(and your TV should be tuned to channel 3 or 4); when the A/B switch is in the B position you
can change channels on the TV.

Connecting Other Pieces of Equipment

You may want to connect a VCR, laser disc player, satellite receiver, or another type of equip-
ment to your TV. We recommend that you follow the instructions included with the piece of
equipment you wish to connect.

Safety Note

If you plan on being away from your home for an extended period of time, or if a thunderstorm
is approaching, you should unplug your television, and you may wish to disconnect your TV
from a rooftop or satellite antenna. You do not need to disconnect your TV from a cable system.
10
Chapter 2 : Connecting an Antenna or Cable to Your TV
, follow these steps: Find the primary incoming coaxial cable. Plug this
, connect the