Motorola i365 User Manual page 209

8.
Enter the user name and password for your
Internet service and check the appropriate fields
for connecting to your service provider (if
applicable). Click Next
the process.
Connecting to the Internet or a Network for
the First Time
Before you use your phone to connect to the Internet or
a network for the first time, you must disable LCP
Extensions.
1. From
Network Connections
connection you just created.
2.
From the dial-up screen, click
3. From the Properties screen, click on the
tab, and click on
Settings
4.
Remove the checkmark from
and click OK . You will then be returned to the
dial-up screen and can now connect to the Internet
or a network.
and then Finish to complete
, select the dial-up
Properties .
Networking
.
Enable LCP Extensions
Testing the Connection with
HyperTerminal
A connection test can be performed using
HyperTerminal to determine if your computer and
phone are communicating.
1. Open HyperTerminal by clicking
Accessories > Communications > HyperTerminal
2.
When prompted, enter a name and select an icon
for the connection you are creating, and click
3.
Click on
Connect using
your phone is installed on. Click
4.
Click on Bits per second
5.
To determine if your computer is communicating
with your phone, use the following commands:
ATI1 – This command will show you the modem
,
model.
– This command will show you the software
ATI2
version that is on the unit.
– This command will show you the build date
ATI3
of the unit.
and selecting
Start
and select the COM port
.
OK
, and select OK .
Section 3B. Data Services
.
OK .
197