Installing Nds Edirectory - Novell Account Management 2.1 Quick Start Manual

A C C O U N T M A N A G E M E N T
To upgrade an existing tree, run DSREPAIR on the server that contains the master
replica of the Tree partition.
The NDS eDirectory installation program checks the existing schema's version. If the
schema has not been upgraded, the installation program instructs you to run DSREPAIR,
then discontinues.
1 1 1 1
Copy PATCHES\DSREPAIR\ NTNDS8\DSREPAIR. DLL from the product CD to the
directory where you installed NDS, for example, G:\NOVELL\NDS.
This file is version 8.35.
2 2 2 2
Start NDSCONSOLE by running NDSCONS.EXE.
This file is in the directory where you installed NDS.
3 3 3 3
Select DSREPAIR from the NDS Service list.
4 4 4 4
Enter -ins in the Startup Parameters field > click Start.
After the schema has been updated, the status field next to the DSREPAIR module
in NDSCONSOLE will be blank.
5 5 5 5
To see the results of the schema update, select DSREPAIR in NDSCONSOLE.
6 6 6 6
Click Start > File > Open Log File > Open.
The last entry of the log file will contain the results of the schema update.

INSTALLING NDS EDIRECTORY

1 1 1 1
At the NT/2000 server, log in as Administrator or as a user with administrative
privileges.
2 2 2 2
Run SETUP.EXE from the NT directory on the product CD.
3 3 3 3
Select which components to install.
You can install the components separately or together.
! Install Novell Directory Services
This option installs NDS in an NT-only or mixed NetWare/NT server
environment.
Follow the online instructions in the Installation Wizard.
20