Pioneer Super Tuner IIID AVH-P3100DVD Operation Manual page 90

Section
19 Available accessories
! Auto TA – Time alignment created by auto
TA and EQ. (Refer to Auto TA and EQ (auto-
time alignment and auto-equalizing) on
page 92.)
! Custom – Adjusted time alignment that
you can create for yourself
! Off – Turn the time alignment off
! TA Adjust – Adjust the time alignment as
desired
# You cannot select Auto TA if auto TA and EQ
has not been carried out.
# You cannot select TA Adjust when neither
Front-L nor Front-R is selected in Position.
Adjusting the time alignment
You can adjust the distance between each
speaker and the selected position.
! An adjusted time alignment is memorized
in Custom.
1 Touch Time Alignment and then touch
TA Adjust.
# You cannot select TA Adjust when neither
Front-L nor Front-R is selected in Position.
2 Touch a or b to select the speaker to
be adjusted.
Each time you touch a or b selects the speak-
er in the following order:
Front-L (front speaker left)—Center (center
speaker)—Front-R (front speaker right)—
Rear-R (rear speaker right)—Rear-L (rear
speaker left)—Subwoofer (subwoofer)
# You cannot select speakers whose size is set
to Off. (Refer to Setting the speaker setting on
page 87.)
3 Touch c or d to adjust the distance be-
tween the selected speaker and the listen-
ing position.
Each time you touch c or d increases or de-
creases the distance. 0.0inch to 200.0inch is
displayed as the distance is increased or de-
creased.
90
En
Using the equalizer
The equalizer lets you adjust the equalization
to match the car's interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
Powerful
Powerful
Natural Natural
Vocal
Vocal
Flat Flat
Custom1
Custom 1
Custom2 Custom 2
Super Bass
Super bass
! Custom1 and Custom2 are adjusted equal-
izer curves.
! When Flat is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat and a set equalizer curve.
1 Touch Parametric EQ.
2 Touch a or b to select the desired item.
Each time you touch a or b selects the item
in the following order:
Equalizer (equalizer)—SP-Select (speakers)—
Band (bands)—Frequency (center frequency)
—Level (equalizer level)—Q. Factor (Q factor)
3 Touch d to select the equalizer.
Touch d repeatedly to switch between the fol-
lowing equalizers:
Powerful—Natural—Vocal—Flat—Custom1
—Custom2—Super Bass