Initial Settings; Adjusting Initial Settings; Switching The Auxiliary Setting; Setting The Rear Output And Subwoofer Controller - Pioneer Super Tuner IIID AVH-P3100DVD Operation Manual

Initial Settings

Adjusting initial settings

1 Function display
Shows the function names.
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Touch the source icon and then touch
Off to turn this unit off.
2 Touch the screen to display the touch
panel keys.
3 Touch AV Menu and then touch
Initial Menu to display the function names.
The function names are displayed and oper-
able ones are highlighted.
4 Touch ESC to return to the ordinary dis-
play.
# To return to the previous display, touch
Back.

Switching the auxiliary setting

Auxiliary devices connected to this unit can be
activated individually. Set each AUX source to
ON when using. For more information about
connecting or using auxiliary devices, refer to
Using the AUX source on page 59.
1
Switching the auxiliary 1 setting
% Touch AUX1 on the initial menu to se-
lect desired setting.
! Video – auxiliary video device connected
with 4-pole mini plug cable (e.g., CD-
V150M)
! Audio – auxiliary device connected with
stereo mini plug cable
! iPod – an iPod with video capabilities con-
nected with CD-IU50V
! Off – No auxiliary device is connected
Switching the auxiliary 2 setting
% Touch AUX2 on the initial menu to turn
auxiliary 2 setting on.
# To turn auxiliary 2 setting off, touch AUX2
again.
Setting the rear output and
subwoofer controller
This unit's rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (Full) or subwoofer
(Subwoofer) connection. If you switch the
rear output setting to Subwoofer, you can
connect a rear speaker lead directly to a sub-
woofer without using an auxiliary amp.
Initially, the unit is set for rear full-range speak-
er connection (Full). When rear output is con-
nected to full range speakers (when Full is
selected), you can connect other full range
speakers (Rear) or a subwoofer (Subwoofer)
to the RCA rear output.
! When the multi-channel processor (DEQ-
P8000) is connected to this unit, you can-
not operate this function.
1 Touch Rear Speaker on the initial menu.
2 Touch c or d next to Rear Speaker to
switch the rear output setting.
Touch c to select full-range speaker and Full
appears in the display. Touch d to select sub-
woofer and Subwoofer appears in the dis-
play.
Section
15
51
En