Table of Contents
Advertisement
The SNMP Trap Receiver Configuration Web page includes the following configurable data:
SNMP Trap
SNMP Trap Destination
Cold Start
Trap Event
Warm Start
Login Fail
Link Up
Link Down
Apply button
Table 4-5 Descriptions of the SNMP Trap Receiver Configuration Web Page Screen Objects
Figure 4-13 SNMP Trap Receiver Configuration Web page screen
Allow disable or enable the SNMP Trap function, the default mode is "Disable".
Allow input the IP address of SNMP Trap Destination.
When Managed Media Converter executes Cold Start operation, the
administrator PC (SNMP Trap Destination) will receive a Cold Start Trap.
When Managed Media Converter executes Warm Start operation, the
administrator PC (SNMP Trap Destination) will receive a Warm Start Trap.
When Web login fail situation appears on Managed Media Converter, the
administrator PC (SNMP Trap Destination) will receive a Login Fail Trap.
When TP or Fiber port connection is build up, the administrator PC (SNMP Trap
Destination) will receive a Link Up Trap.
When TP or Fiber port connection is Disconnect, the administrator PC (SNMP
Trap Destination) will receive a Link Down Trap.
Press "Apply" button for save current configuration of Managed Media
Converter.
-25-
Advertisement
Table of Contents
