Samsung GALAXY TAB3 User Manual page 127

Wi-Fi Direct Settings
You can configure your device to connect directly with other
Wi-Fi capable devices. This is an easy way to transfer data
between devices. These devices must be enabled for Wi-Fi
Direct communication. This connection is direct and not via a
hot spot or WAP.
1. Touch Settings
2. Touch the
3. Touch Wi-Fi Direct to display Available devices.
Your device begins to search for other devices enabled
with Wi-Fi direct connections.
4. When scanning is complete, touch a device name to
begin the connection process to another Wi-Fi Direct
compatible device.
Note: The target device must also have Wi-Fi Direct service
active and running before it is detected by your device.
The direct connection establishes, the status field
displays "Connected", and your connected device is
displayed in the Wi-Fi Direct devices listing.
Wi-Fi.
OFF / ON icon to turn Wi-Fi on.
5. Touch End connection
connection.
For more information, refer to "Wi-Fi Direct" on page 89.
Bluetooth
Use Bluetooth settings to manage Bluetooth connections, set
your device's name, and control your device's visibility.
Turning Bluetooth On or Off
To turn your device's Bluetooth service On or Off:
From any screen, touch the top of the screen and
swipe downward, to display the Quick Settings, and
then touch Bluetooth in the Quick Settings menu.
For more information, refer to "Quick Settings" on
page 26.
– or –
Settings.
Touch
On the Bluetooth tab, touch the
to turn Bluetooth on or off.
For more information about using Bluetooth to exchange
information with other Bluetooth devices, see "Bluetooth" on
page 90.
OK to end the Wi-Fi Direct
OFF / ON icon
Settings 122