Volume Adjustment; Main Menu; Sound Adjustment; Bass Boost - Sanyo CE28WN3-B Instruction Manual

Volume Adjustment

To adjust the sound volume, press the
Volume
Note : If the volume is restricted check Hotel Specification settings
on page 17.

Main Menu

To enter and exit the main menu press the F button on the TV or
the Menu button on the remote control unit.
Sound
Picture
Externals
More
T uning
Use the or buttons to scroll up and down between menu
options. Use the button to open the sub menus and the
and buttons to switch between the options. Press the Menu
button to return to a higher level menu screen.

Sound Adjustment

Press the Menu button and select the Sound option from the Main
Menu by pressing the or
when the button is pressed, providing the following options.
Menu
Sound
Volume
Balance
Bass
T reble
Mode
Effects
Phones
Volume
Volume : Increase the sound level
output.
Balance
Balance : Balances the sound level
between the left and right speakers.
Bass
Bass : Adjusts bass (low) frequencies.
T reble
Treble : Adjusts treble (high) frequencies.
Mode STEREO
Mode : Provides two or three options
depending on the sound standard detected
in the selected channel: DUAL A, DUAL B,
MONO, STEREO, NICAM MONO.
Note: Balance, Bass, Treble and Volume can also be accessed by
pressing the /OK button.
Effects : Select the effects option by
Menu
>
Sound
pressing the
Sound
Volume
the
Balance
Bass
options enabling the adjustment of certain
T reble
Mode
sound properties (see "Sound Effects").
>
Effects
>
Auricular Effects
Select sound required by pressing the
Stereo mode

Bass boost

or

Auto volume

press the
the Sound Menu press the Menu button
Menu
>
Sound
once.
Sound
Volume
Balance
Bass Headphones :Press the
T reble
This sub menu is available only when the
Mode
>
Effects
> presence of headphone is detected. A sub
Phones
Headphones
menu drops down when the
Volume
Balance
pressed, with the following options: Volume,
Bass
T reble
Balance, Bass, Treble and mode (*), with
the same functions as the Sound menu
described previously on this page.
To return to the main menu press the Menu button.
The menu display only appears on the screen for 10 seconds.
* Mode only appears if there is a dual language broadcast signal.
6
SOUND FUNCTIONS
SOUND FUNCTIONS
/ buttons.
Menu
>
>
>
>
>
buttons. A sub menu will drop down
>
Sound
>
>
or buttons followed by
button. This sub menu provides
button. To select other sub menus
or buttons. To return to
or buttons.
button is
Sound Effects
Stereo Mode
Several of the following options are displayed depending on the type
of broadcast, when pressing the Surround button or the
PSEUDO STEREO ON/OFF : When ON, it provides a pseudo-stereo
effect to mono broadcasts.
NORMAL STEREO : Switches to stereo sound if broadcast is in stereo.
SPATIAL STEREO : Enhances stereo sound when enabled.
3D SURROUND MONO : This mode is especially prepared to produce
3D Surround effects in mono broadcasts.
ACTIVE 3D SURROUND : Provides optimum 3D Surround effects.
SUPER 3D SURROUND : Select this mode if you wish to enhance the
3D Surround effect, e.g. when viewing
movies.
NOTE : Balance will have no effect on the audible sound
in any 3D surround mode, although the on screen
display will still adjust.
What is Active 3D Surround?
In traditional stereo sound, left and right channels combine to create a
stereo image. Better speakers can create a larger perceived sound
stage, so sound seems to emanate from a few feet behind the
monitor. Sound can have a much wider presence with Active 3D
surround technologies. Music and sound effects appear to come
from points in the room far from the speakers. Objects (such as
jets) seem to move towards and then past the listener, whilst the
important channel sound still appears to come from the centre of
the screen.
Optimum positioning
Sit at a distance of approximately 2 to 4 meters from the TV set.
Listen facing the centre of the TV set.
Remove any obstructions between you and the TV set.
Effects
Bass boost
: Enhances bass frequencies when enabled. This can
be accessed by pressing the BASS button.
Auto Volume
: Keeps steady volume when enabled.
A•B button.
2 ~ 4
meters