Table of Contents
Advertisement
Initial Set Menu
Registering a New User
To register a new user, configure the user ID, password, and user access level through the following steps:
1
2
3
1
Enter the user ID into the [USER ID] box.
Enter the user name (user ID) that is
used to identify the user on the network.
The user ID can consist of up to 16
characters including letters
(case-sensitive) and numbers. You can
also use these special characters: :./*
The user ID (user name) must be
unique. If your specified user ID is
already in use, a "duplicate"
message appears.
2
Enter the password into the [PASSWORD]
box.
Enter the password that is required to
authenticate the user at login time.
The password can consist of 4 to 16
characters including letters
(case-sensitive) and numbers. You can
also use these special characters: :./*
3
Choose a user access level.
Select one of the four user access levels
by clicking the corresponding radio
button. For more information, see P11.
4 4
(Required user access level: ID4)
Available options:
ID1 (Monitoring user), ID2 (Playback user),
ID3 (Recording user), ID4 (Administrative user)
4
Click
.
You are prompted to confirm the
password by reentering it.
5
Reenter the password.
Be sure to reenter the new password to the
[NEW] box. This must be identical to the
one you specified in step 2. Then click
[OK].
When the reentered password is correct,
the registration is completed, and the
user registration list is updated with the
newly registered user ID (user name)
and user access level.
An error message appears if your
reentered password does not match the
one you specified. If this is the case,
reenter the correct password.
5
90
English
Advertisement
Table of Contents
