Table of Contents
Advertisement
Watching Live Video
● How to Listen to the Sound Part in
the Video
Use the sound playback panel on the control
panel. (When in the multi-view layout, specify
the sub-pane for which you want to listen to
the sound by clicking its title bar.)
1
2
3
1
Sound volume
Drag the control to the left or right to adjust
the sound volume.
2
Turn on/off sound output
Click to toggle between
(OFF).
3
Output channel selector
When you are connected to a 4-channel
DVR, specify the set of channels for which
you want to listen to the voice by selecting
the appropriate check box.
• If a channel is feeding a masked
video stream, no sound is outputted
whichever sound output setting is
selected.
• To listen to the sound part in the
video, go to the REC MODE SET tab
of the [DVR Set] window and turn on
[AUDIO RECORDING]. Note that an
error is generated if your computer
has no sound card installed.
33
English
(ON) and
● How to Turn Off the Currently
Displayed Video
Click the Cut-Off button (
panel. This turns off the display of video
streams, and black placeholders appear in
place of the video streams.
When you perform this action, you are
disconnected from the DVR in use;
therefore, the video is turned off for all
the cameras connected to that DVR.
To turn on the video again, double-click the
camera title on the tree list.
About DVR Reconnect Feature
If the live video stream from a camera
is disconnected or otherwise disturbed
for some reason, hold down the [Shift]
key and double-click the camera title
on the tree list. On the confirmation
dialog box that appears, click [Yes] to
reconnect to the DVR.
) on the control
Advertisement
Table of Contents
