Troubleshooting Sbc Express - Efficient Networks Macintosh 5260 Read Me First

APPENDIX D

Troubleshooting SBC Express

Please refer to this list if you are having problems using SBC Express or if you receive an error
message. If after troubleshooting, you are still having problems, then you should contact the
numbers listed in Appendix A.
Step Problem
Minimum SBC Express verifies minimum requirements on
Resources several resources including hard drive space, RAM,
operating system level, and processor speed and
family.
If any of these resources are under the required value,
an error will display describing which resource did not
meet the requirement.
Installing When installing Network Interface Cards the
Network installation process may ask for the original installation
Interface Card disk.
Incompatible This scenario can occur when a machine had a
Adapter previous NIC or Network Adapter installed, but the
physical device is missing or was misconfigured.
This scenario can occur if Client for Microsoft
Missing Internet
Networks is not installed with the TCP/IP protocol or
Protocol
if the NIC is installed without binding TCP/IP to the
NIC.
Disabled This scenario can occur when a NIC is present in the
Network Adapter system, yet the adapter has been disabled.
Installation Guide for Customer Self-Install: Efficient Networks® 5260, Macintosh
©2001 SBC Advanced Solutions, Inc. All rights reserved.
Solution
Update your computer to the recommended
resource level.
You may have to provide an installation CD-
ROM for the installation of the drivers to be
successful.
Use the "Fix" button to launch the appropriate
system control panel along with context sensitive
help. The help provided will guide you through
the steps to disable or remove the adapter.
Use the "Fix" button to launch the appropriate
control panel and context sensitive help to guide
you in binding TCP/IP to the network adapter.
Use the "Fix" button with context sensitive help
to guide you through enabling the adapter.
Page 26