Related Manuals for Efficient Networks SpeedStream 3000 Series
Summary of Contents for Efficient Networks SpeedStream 3000 Series
- Page 1 6SHHG6WUHDP 6HULHV $'6/ ,QWHUQDO 0RGHP ,QVWDOODWLRQ *XLGH Part No. 007-3005-001, Rev B...
- Page 3 This documentation and the accompanying computer programs (collectively, the Software) are licensed, not sold, to the End User by EFFICIENT NETWORKS, INC. (“ENI”) for use only under the following terms. ENI reserves any right not expressly granted to the End User. The End User owns the media on which the Software is recorded but ENI retains ownership of all copies of the Software itself.
- Page 4 If the NIC, USB or RAU does not function as warranted during the warranty period, Efficient Networks, Inc. will either repair the defective product or replace it with a new or remanufactured functionally equivalent product of equal value.
-
Page 5: Product Overview
Refer to Table 1 for installation requirements that are specific to your machine’s operating system. Table 1 System Requirements • Minimum of 16 Mbytes RAM, 32 Mbytes Windows 95/95A/95B recommended • Pentium-class processor required • The PCI bus must support bus mastering. Efficient Networks, Inc. Product Overview... - Page 6 The anti-static discharge protection device is required when handling the modem and prevents damage to the electronic components. Do not leave this to chance! Not using anti-static protection may result in serious damage to the hardware. Product Overview Efficient Networks, Inc.
-
Page 7: Hardware Installation
Remove the modem from the anti-static bag and check for any damage. If there are any visible signs of damage, contact Efficient Networks Customer support for a Return Materials Authorization number. Please return the modem in the original anti-static bag and the original shipping container. -
Page 8: Installing The Modem
Press the modem firmly into the slot to ensure that it is properly seated. Secure the modem’s end bracket to the chassis with the bracket screw. Replace the chassis cover and apply power to the machine. Installing the Modem Efficient Networks, Inc. -
Page 9: Modem Leds
The modem comes with an RJ11 jack that uses pins RJ11 Jack 3 and 4. Optionally, the modem may be configured Pinout to use pins 2 and 5. If so, the modem markings will indicate this. Efficient Networks, Inc. Installing the Modem... -
Page 10: Software Installation Overview
To install the CIP/1483 Software… go to page in Windows 95 or 95A ..go to page in Windows 95B ..... go to page in Windows 98 .... go to page in Windows NT Software Installation Overview Efficient Networks, Inc. -
Page 11: Virtual Private Networking
Install MSDUN1.3, continue? Next When you are prompted to restart, click Virtual Private Networking The Microsoft Virtual Private Networking (VPN) adapter is required by the PPP driver. The VPN adapter is normally provided in Windows 98 Efficient Networks, Inc. Installing PPP Software... - Page 12 After installing the modem hardware, power on the system. When Windows comes up, insert the software installation CD in the CD-ROM drive. Windows will bring up the dialog box. Be sure New Hardware Found that is selected before you click Driver from disk Installing PPP Software Efficient Networks, Inc.
- Page 13 Configure the settings as directed by your network service provider. When configuration is complete, if prompted to restart Windows, click When the system comes back up, you will need to set up your PPP dial-up connection as described on page 22. Efficient Networks, Inc. Installing PPP Software...
- Page 14 After installing the modem hardware, power on the system. When Windows comes up, insert the software installation CD in the CD-ROM drive. dialog (shown on the next page) Update Device Driver Wizard will appear. Click Next Installing PPP Software Efficient Networks, Inc.
- Page 15 On the next dialog box, click the button. Other Locations On the dialog, select Select Other Locations Browse Click on the CD-ROM drive in the list, select W95-98 then click . On the dialog, click Select Other Location Efficient Networks, Inc. Installing PPP Software...
- Page 16 Speedstream PPP requires Dial-Up Networking version 1.2 or better to run. Please consult the release notes regarding Dial-Up Networking 1.2 installation before you continue. If this message appears, click and refer to the DUN installation instructions on page 9. Installing PPP Software Efficient Networks, Inc.
- Page 17 DUN installation, the installation software will not be able to create address book entries. To recover from this situation, use the following procedure to update the service profile: Efficient Networks, Inc. Installing PPP Software...
-
Page 18: Installation In Windows 98
After installing the modem hardware, power on the system. When the system comes up, the will Add New Hardware Wizard appear indicating that the modem was discovered. Insert the installation CD-ROM and click Next Installing PPP Software Efficient Networks, Inc. - Page 19 On the next dialog, the first option Search for the best driver for should be selected. your device (Recommended) On the next dialog, select only the checkbox labeled Specify a . Then click the button. location Browse Efficient Networks, Inc. Installing PPP Software...
- Page 20 Configure the settings as directed by your network service provider. Click the Finish button to complete the configuration. When the driver installation is complete, set up your dial-up connection as described on page 22. Installing PPP Software Efficient Networks, Inc.
-
Page 21: Installation In Windows Nt
CD in a CD-ROM drive. Click the button and point to ; click Start Settings Control Panel. Double-click the icon. Network When the Network window appears, click the tab and then Adapters click the button. Efficient Networks, Inc. Installing PPP Software... - Page 22 <drive> is the CD drive letter). You must enter the correct path name to the RAS service. If the path is entered wrong, cancel the RAS installation. Go to your Network settings by clicking on the button and Start Installing PPP Software Efficient Networks, Inc.
- Page 23 Release Notes for installing the latest service pack. When the system comes back up, one or more configuration dialog boxes may or may not be presented, depending on your service provider. Configure the settings as directed by your network service provider. Efficient Networks, Inc. Installing PPP Software...
- Page 24 To copy the connection to other users profiles, copy all files in your Dial-Up Networking folder with a .dun extension to c:\. Then login as each individual user and copy the .dun files to the Dial-Up Networking folder. Installing PPP Software Efficient Networks, Inc.
- Page 25 New Hardware Found that Driver from disk is selected before you click Next, the dialog box will appear. Click Install From Disk Browse select the CD-ROM drive from the list. Drives Double-click then click W95-98 Cip-1483, Efficient Networks, Inc. CIP/1483 Driver Installation...
- Page 26 After installing the modem hardware, power on the system. When Windows comes up, insert the SpeedStream installation CD in the CD-ROM drive. dialog (shown on the next page) Update Device Driver Wizard will appear. Click Next CIP/1483 Driver Installation Efficient Networks, Inc.
- Page 27 On the next dialog box, click the button. Other Locations On the dialog, select Select Other Locations Browse Efficient Networks, Inc. CIP/1483 Driver Installation...
- Page 28 You may be prompted for the Windows 95 installation CD. If so, insert the CD and click When the system comes back up, you may need to configure the Internet Protocol (IP) address for your connection. Refer to the procedure on 30. CIP/1483 Driver Installation Efficient Networks, Inc.
- Page 29 System Device Manager select the ENI card under * Other devices Click . Exit the Device Manager and reboot the machine. Remove Shutdown and restart the system, then perform the software installation procedure again. Efficient Networks, Inc. CIP/1483 Driver Installation...
- Page 30 After installing the modem hardware, power on the system. When the system comes up, the will Add New Hardware Wizard appear indicating that the modem was discovered. Insert the installation CD-ROM and click Next CIP/1483 Driver Installation Efficient Networks, Inc.
- Page 31 On the next dialog, the first option Search for the best driver for should be selected. Click your device (Recommended) Next On the next dialog, select only the checkbox labeled Specify a . Then click the button. location Browse Efficient Networks, Inc. CIP/1483 Driver Installation...
- Page 32 Configuring the IP Address in Windows 95/98 When using the CIP/1483 driver, you may need to configure an Internet Protocol (IP) address that will be used to identify your computer on the network. CIP/1483 Driver Installation Efficient Networks, Inc.
- Page 33 Windows NT comes up, log in and insert the driver installation CD in a CD-ROM drive. Click and point to ; then click Start Settings Control Panel. Double-click the icon. Network When the Network window appears, click the tab and then Adapters click the button. Efficient Networks, Inc. CIP/1483 Driver Installation...
- Page 34 Pull down Microsoft TCP/IP Properties list and select the SpeedStream client. Adapter Follow your service provider’s instructions to configure the IP address of your system. Click . This completes the configuration of the modem. CIP/1483 Driver Installation Efficient Networks, Inc.
- Page 35 The taskbar icon can be turned off by going to the Control Panel double-clicking the icon. This will bring up the SpeedStream Status dialog box. The icon is displayed when the SpeedStream Status Show Icon on Taskbar checkbox is checked. Efficient Networks, Inc. SpeedStream Status...
-
Page 36: Software Removal
Network dialog. Close When prompted to restart the system, select Shut down Windows and turn off the machine. Remove the adapter from the machine and turn the system back on. Removing the Driver Software - Windows 95/98 Efficient Networks, Inc. -
Page 37: Technical Reference
SpeedStream 3020/3060 Adapter Specifications Size 6.85 in. x 4.2 in. (17.39 cm x 10.66 cm) Weight 3 oz. (85.04 grams) Max 1.5 amps @ +5V ± 5% Power Max 0.2 amps @ ±12V ± 5% Efficient Networks, Inc. SpeedStream 3010 Adapter Specifications... - Page 38 Bit Error Rate using a 6 dB margin Transmitter type Transformer-coupled differential line driver Line Power PSDM per T1E1.413 POTS Splitter Equipped with a high pass filter Receiver Transformer-coupled differential line receiver with adaptive equalization SpeedStream 3020/3060 Adapter Specifications Efficient Networks, Inc.