Siemens HC15 Getting Started Manual page 25

Getting Started with HC15
Confidential / Preliminary
In the Phone number box, put the dial string *99***1# commonly used to access the GPRS
network.
Note: The number "1" added before the hash determines that the first PDP context shall be
used. The number must be identical to the <cid> value set with AT+CGDCONT (see Chapter
3.7)
Depending on the network, you
may be required to put a User
name and a Password for the
dial-up connection.
required, you may leave all
boxes empty. Click Next and, in
the resulting dialog, click Finish.
This will cause the Connect... dialog to appear (screen is shown in Chapter 4.1.2). Yet, at
this moment, it is recommended that you press Cancel in order to check, and if necessary, to
configure the dial-up connection as described in Chapter 4.1.2.
HC15_startup_v01
If not
Page 25 of 31
s
2007-01-22