Assigning A Password - Gigaset SX763 User Manual

Assigning a password

In the first step of the configuration you can change the password for the user interface.
When the device is supplied, the configuration of your Gigaset SX763 WLAN dsl is pro-
tected with the admin password. To prevent unauthorised changes to the configura-
tion, you should change the password at regular intervals.
ì
Enter the old password in the Current password field.
ì
Enter the new password in the New password field and repeat the entry in the
Confirm new password field.
The password may contain up to 20 characters. Note case sensitivity. Avoid proper
names and all too obvious words. Use a combination of letters, digits and special
characters.
Note:
If you ever forget your password you will have to return the Gigaset SX763 WLAN
dsl to its factory settings (page 108). Please bear in mind that this will restore all
settings to the factory configuration. The password will again be admin.
u
To go to the next step, click Next >
Security Setup Wizard
45