Selecting A Language; Connecting To The Internet Manually - Gigaset SX763 User Manual

Selecting a language

The user interface can be presented in various languages.
ì
Click Language at the top right of the start screen.
ì
If you wish to change the preset language, select the new language you require from
the list.
ì
Click OK to apply the setting.
Once the procedure has been concluded, the start screen will be displayed again.

Connecting to the Internet manually

Once you have configured your Internet access (see page 39 and page 57), you can
establish a manual connection to the Internet on the start screen if you have selected
Connect on demand or Connect manually as the Connection mode.
To establish or end an Internet connection manually:
ì
Open the start screen of the Gigaset SX763 WLAN dsl as described on page 32.
If you have already started the user interface, click the start screen tab at the top left
of the window.
If you have not yet started the user interface, do so now and log on.
ì
Click Connect to establish a connection to the Internet.
ì
Click Disconnect if you no longer need the connection.
Note:
The Connect and Disconnect buttons will only appear on the start screen if you have
not selected Always on as the Connection mode.
The user interface
35