Using The Wireless Controller - Sony PS3 CECH-2003B Instruction Manual

Using the wireless controller

Preparing for use
To use a wireless controller, you must first register or "pair" the controller
with the PS3™ system and assign a number to the controller.
Step 1: Pair the system and the controller.
 When using for the first time
 When using with a different PS3™ system
Step 2: Assign a controller number.
Every time the system is turned on
Step 1: Pair the system and the controller
When using the controller for the first time or when using with a different
PS3™ system, you must first pair the devices. If you turn on the system
and connect the controller using a USB cable, the pairing will be
completed automatically.
USB cable (supplied)
22

Check that the system is turned on
(power indicator is lit solid green).
Step 2: Assign a controller number
Each time you turn on the system, a number must be assigned to the
controller.
Press the PS button.
When the controller has been assigned a
number, the port indicators for the assigned
number turn solid red.
You can connect up to 7 controllers at one time. The controller number
is shown by the number above the port indicators. For numbers 5-7,
add the numbers of the lit indicators.
Example: Controller number 5 has been assigned.
Hints
 Pairing and assigning controller numbers can only be done when the system is
turned on (power indicator is lit solid green).
 When a paired controller is used with another PS3™ system, the pairing with
the original system is cleared. Pair the controller with the system again if the
controller has been used with another system.
 If the controller or the system is turned off, the port indicators on the controller
will turn off and the assigned number will be cleared.
All of the port indicators flash.
1 2 3 4

1 2 3 4
1 2 3 4
1