Quick Start (For Introduction); Ready For Training; Start Of Training; End Of Training - Kettler RACE Training And Operating Instructions

Training and Operating Instructions
16
GB
Quick start
(for introduction)
Without special settings
• press a key
Display
• All segments are shortly displayed (segment test).
• The total kilometres are shortly displayed.
Subsequently change to the display "Reading for trai-
ning".

Ready for training

Display
All segments display "Zero", except for pulse (if activated)
and brake level.
Start training by pedalling.

Start of training

Display
• Pedal rotation segments, distance, speed, energy and
time increase.
• Pulse (if activated).
Brake setting levels 1-10
• Turn hand wheel to the right to increase the brake
level; turn hand wheel to the left to decrease the brake
level.
Training interruption/end of training
If you interrupt or complete your training, average values
of the last training unit are displayed with the Ø symbol.
Display
• Average values Ø:
pedal rotation segments, speed, brake level and pulse
(if activated).
• Total values:
distance, energy and time.

Sleep mode

Four minutes after the end of training, the device switches
into the sleep mode. If you press a key, the display starts
again with the segment test, odometer and ready for trai-
ning.