Connecting The Camera To The Macintosh - JVC GZ-HD40 Operation Manual

Macintosh 2

Connecting the Camera to the Macintosh

Preparation:
Close the LCD monitor to turn off the camera.
USB Connector
USB Cable
<NOTES>
•
Never disconnect the USB cable while the access lamp on the camera lights or blinks.
•
Do not turn off the camera when the USB cable is connected, to prevent malfunctions of the
computer.
•
Connect the camera directly to the computer, not through a hub.
•
Do not use an extension USB cable.
•
When you copy files from the computer to the recording medium on the camera, do not include any
other files than those recorded on the camera.
•
Do not delete, move, or rename the files and folders in the camera from the computer.
◆ When you have finished operation
Always follow the procedures below when disconnecting the camera, or turning off the camera/
computer power.
Failing to do so may cause damage to the camera and computer.
) Drag & drop the recording medium icon on the desktop into the [Trash] icon. If the confirmation
message appears, click [OK].
) Confirm that the access lamp on the camera does not light or blink. If the access lamp lights or
blinks, wait until it is turned off before proceeding.
) Disconnect the USB cable.
) Turn off the camera and computer.
To AC Outlet
USB Connector

AC Adapter
DC Connector