Package Contents Local Unit (L), Remote Unit (R), or Both (B) External Power Supplies (0, 1, or 2) Mounting Hardware Wallplate Screws Screwdriver for Equalization Adjustment HDMI Daisy-chain Cable Product Features • Support a maximum video resolution of 1080p (60Hz) • Plug-and-play; no software or drivers required • Support up to 7.1 channel surround sound audio • HDCP and 3D compatible 201109206-93-3023-EN.indd 2 10/24/2011 10:01:17 AM...
Page 3
Product Features B126-1A1 • HDMI over Cat5 Active Extender Kit (Box-style) • Extends a 1080i (60Hz) signal up to 200 ft. from the source, or a 1080p (60Hz) signal up to 150 ft. from the source • Features an additional HDMI port on the local transmitter unit for the connection of local monitor • Remote receiver unit features a built-in Equalization control for video image adjustment • Includes mounting hardware that allows both the local transmitter and remote receiver units to be wallmounted, rackmounted or pole mounted B126-1A1-WP • HDMI over Cat5 Active Extender Wallplate Kit • Extends a 1080i (60Hz) signal up to 200 ft. from the source, or a 1080p (60Hz) signal up to 150 ft. from the source • Remote receiver unit features a built-in Equalization control for video image adjustment • RJ45-style wallplates allow for the use of standard Cat5e/6 patch cables; 110 punchdown connection not required B126-002...
Page 4
Product Features B126-004 • 4-Port HDMI over Cat5 Extender/Splitter Local Transmitter Unit (Box-style) • Splits an HDMI signal into 4 • Features an additional HDMI port, which can be used to connect a local monitor or to daisy-chain additional B126-004 units. Up to 3 B126-004 units can be daisy-chained together to increase the number of connected monitors. • Works with remote/repeater and receiver units to extend an HDMI signal past the 16 ft. (5 m) distance limitation • Includes mounting hardware that allows unit to be wallmounted, rackmounted or pole mounted. • Up to 3 B126-004 units can be mounted in a B132-004-RB 1U rackmount bracket B126-1A0 • HDMI over Cat5 Active Extender Remote Receiver Unit (Box-style) • Works with B126-002 and B126-004 extender/splitters to extend a 1080i (60Hz) signal up to 200 ft. from the source, or a 1080p (60Hz) signal up to 150 ft. from the source...
Page 5
B126-1A0-WP-1 • HDMI over Cat5 Active Extender Wallplate • Works with B126-002 and B126-004 extender/splitters to extend a 1080i (60Hz) signal up to 200 ft. from the source, or a 1080p (60Hz) signal up to 150 ft. from the source • Features a built-in Equalization control for video image adjustment • RJ45-style wallplate allows for the use of standard Cat5e/6 patch cables; 110 punchdown connection not required B126-1P0 • HDMI over Cat5 Passive Extender Remote Receiver Unit (Box-style) • Works with B126-002 and B126-004 extender/splitters to extend a 1080i (60Hz) signal up to 100 ft. from the source, or a 1080p (60Hz) signal up to 50 ft. from the source • Features a built-in HDMI cable; a separate HDMI cable is not required • No external power required B126-1P0-WP-1 • HDMI over Cat5 Passive Extender Wallplate • Works with B126-002 and B126-004 extender/splitters to extend a 1080i (60Hz) signal up to 100 ft. from the source, or a 1080p (60Hz) signal up to 50 ft. from the source • RJ45-style wallplate allows for the use of standard Cat5e/6 patch cables; 110 punchdown connection not required • No external power required 201109206-93-3023-EN.indd 5 10/24/2011 10:01:17 AM...
Product Features B126-110 • HDMI over Cat5 Active Extender Remote/Repeater Unit (Box-style) • Extends and expands Tripp Lite HDMI over Cat5 installation, allowing multiple monitors to be located at different points in a chain of up to 700 ft. • Extends a 1080i (60Hz) signal up to 175 ft., or a 1080p (60Hz) signal up to 125 ft. from the local transmitter unit to the first remote/ repeater unit in the installation • Extends a 1080i (60Hz) signal up to an additional 175 ft., or a 1080p (60Hz) signal up to an additional 125 ft. from each remote/ repeater unit to the next unit in the chain. In a full 4 level daisychain installation, a 1080i (60Hz) signal can be extended up to 700 ft., or a 1080p (60Hz) signal up to 500 ft. from the source to the last remote unit in the chain.
Mounting Instructions (select models only) The B126-002, B126-004, B126-1A1, B126-1A0 and B126-110 come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting methods. Note: The B126-004 can also be mounted to a Tripp Lite B132-004-RB 1U Rackmount Bracket. Up to 3 B126-004 local units can be connected to a B132-004-RB.
Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling. 3) The B126-1A1 and B126-1A1-WP are set to transmit a stereo audio signal by default.
Page 9
The orange LED illuminates to indicate the unit is connected to a powered ON local unit. Connect the remote unit’s HDMI port to a monitor using a Tripp Lite P568-Series HDMI Cable. Turn on the power to the HDMI source. The orange LED on the local unit illuminates to indicate a signal is being received from the source.
Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling. 3) The B126-1A1 and B126-1A1-WP are set to transmit a stereo audio signal by default.
Page 11
Connect a monitor to the HDMI OUTPUT port on the remote/repeater unit using a Tripp Lite P568-Series HDMI Cable. Connect the external power supply to the remote/repeater unit and plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green power LED and the green RJ45 LEDs illuminate to indicate the unit is receiving power. Up to 4 units can be daisy-chained (3 remote/repeaters and 1 receiver).
Page 12
Connect the external power supply to the remote receiver unit and plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green LED illuminates to indicate the unit is receiving power from the external power supply. The orange LED illuminates to indicate the unit is connected to a powered ON remote/repeater unit.
Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling. All Tripp Lite N202-Series cables are made with 24 AWG solid wire cabling. 3) The B126-002 and B126-004 are set to transmit a stereo audio signal by default.
Page 14
Optional for B126-004: Connect an HDMI monitor to the LOCAL port on the B126-004 using a Tripp Lite P568-Series HDMI Cable. Connect the external power supply to the B126-002 or B126-004 local unit and plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green RJ45 LEDs and the red Power LED on the B126-004, and the green RJ45 LEDs on the B126-002, will illuminate to indicate power is being received from the external power supply.
Page 15
Standard Extender/Splitter Installation Repeat step 9 for each additional monitor you are connecting. Turn on the power to the HDMI source. The orange RJ45 LEDs illuminate on the B126-002 and B126-004 to indicate the unit is receiving a signal from the source. The screen should now be displayed on the connected monitors. If necessary, use the Equalization control on the B126-1A0 or B126-1A0-WP-1 to adjust the video image.
Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling. 3) The B126-002 and B126-004 are set to transmit a stereo audio signal by default.
Page 17
Connect a monitor to the HDMI OUTPUT port on the remote/repeater unit using a Tripp Lite P568-Series HDMI Cable. Connect the external power supply to the remote/repeater unit and plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green power LED and the Green RJ45 LEDs illuminate to indicate the unit is receiving power. Up to 4 units can be daisy-chained (3 remote/repeaters and 1 receiver).
Page 18
Extender/Splitter with Remote/Repeater Installation Connect the external power supply to the remote/repeater unit and plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green power LED and the green RJ45 LEDs illuminate to indicate the unit is receiving power. To add a third remote/repeater unit, repeat steps 8 through 10. To finish your installation with a B126-1A0 or B126-1A0-WP-1 remote receiver unit, proceed to step 12.
Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling. All Tripp Lite N202-Series cables are made with 24 AWG solid wire cabling. 3) The B126-004 is set to transmit a stereo audio signal by default.
Page 21
Optional: Connect a local monitor to the LOCAL HDMI port of the last B126-004 using a Tripp Lite P568-series HDMI cable. Connect the external power supply to the first B126-004 in the daisy-chain and plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green RJ45 LEDs and the red Power LED on the B126- 004 will illuminate to indicate power is being received from the external power supply.
Page 22
Connect the B126-1P0 HDMI connector to a monitor; or, connect the B126-1P0-WP-1, B126-1A0 or B126-1A0-WP-1 to a monitor using a Tripp Lite P568-Series HDMI Cable. Both the green and orange RJ45 LEDs on the B126-1P0, and the green LED on the B126-1P0-WP-1, illuminate to indicate the unit is receiving power from the connected monitor. Repeat step 12 for each additional monitor you are connecting. Turn on the power to the HDMI source. The orange RJ45 LEDs illuminate on the B126-004 to indicate the unit is receiving a signal from the source.
Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling. 3) The B126-004 is set to transmit a stereo audio signal by default.
Page 24
Extender/Splitter Daisy-Chain with Remote/Repeater Installation (B126-004 only) Up to 175 ft. at 1080i (60Hz) Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) Up to 125 ft. at 1080p (60Hz) B126-110 REMOTE/ B126-110 REMOTE/ B126-110 REMOTE/ B126-1A0-WP-1 REPEATER REPEATER...
Page 25
Connect a monitor to the HDMI OUTPUT port on the remote/repeater unit using a Tripp Lite P568-Series HDMI Cable. Connect the external power supply to the remote/repeater unit and plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green power LED and the green RJ45 LEDs illuminate to indicate the unit is receiving power. Up to 4 units can be daisy-chained (3 remote/repeaters and 1 receiver).
Page 26
Connect a monitor to the HDMI OUTPUT port on the remote/repeater unit that you just added using a Tripp Lite P568-Series HDMI Cable. Connect the external power supply to the remote/repeater unit and plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green power LED and the green RJ45 LEDs illuminate to indicate the unit is receiving power. To add a third remote/repeater unit, repeat steps 11 through 13. To finish your installation with a B126-1A0 or B126-1A0-WP-1 remote receiver unit, proceed to step 15.
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.
Page 28
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to: • Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country) • Send the new equipment back for recycling when this ultimately becomes waste...