Advertisement
OPERATION
AND CARE OF UNIT
FAN AND LIGHT
CONTROL
PANEL
FAN:
For best results,
turn the fan on at the beginning
of cooking
and allow
it to run until all smoke
and odors
are removed
from the
room.
I
3.
TO TURN
ON:
Touch
the "ON"
pad. The fan will start
at the highest
speed.
Touch
the "UP ARROW"
and the fan will start at
the lowest
speed.
TO DECREASE
SPEED:
Touch
the "ON"
pad again
momentarily.
Each time the
"ON"
pad is touched
and released,
the motor
speed will
decrease.
If the "ON"
pad is continuously
depressed,
the
speed
will be reduced
to the slowest
speed.
If the "UP
ARROW"
is touched
first, use instruction
No. 3.
TO INCREASE
SPEED:
Touch
the "UP ARROW"
momentarily.
Each
time
the
"UP ARROW"
is touched
and released,
the motor
speed
will
increase.
If the "UP ARROW"
is continuously
de-
pressed,
the speed will increase
to its highest
speed.
Speed
may be increased
or decreased
anytime
during
operation.
TO TURN
FAN OFF:
Touch
the "OFF"
pad
LIGHT:
Do not use bulb larger
than 60 Watts
FILTER:
For best results,
remove
and clean often. The filter
may be placed
in the dishwasher
or washed
in hot sudsy
water.
EXTERIOR
SURFACES:
Clean
the range hood with a mild detergent-and
soft cloth,
Do not use abrasive
cleansers
or soapy
steel
~001
pads.
Page 5
Advertisement
