Yamaha DSP-AX863SE Owner's Manual page 28

Connections
■ Using REMOTE OUT jacks
Connect the component which is the Yamaha product and
have the capability of the SCENE control signals to the
REMOTE OUT jack as follows.
receiver or Yamaha
y
• If the components have the capability of the SCENE control
signals, this unit can automatically activate the corresponding
components and start the playback when you use one of the
SCENE buttons. Refer to the owner's manuals for details about
the capability of the SCENE control signals of the components.
• If the component connected to the REMOTE OUT jack is not
the Yamaha product, set "SCENE IR" in the advanced setup
menu to "OFF" (see page 97).
26
En
REMOTE OUT
Remote
control in
Infrared signal
component
Using the VIDEO AUX jacks on the
front panel
Use the VIDEO AUX jacks on the front panel to connect a
game console or a video camera to this unit.
Caution
Be sure to turn down the volume of this unit and other
components before making connections.
Notes
• The audio signals input at the DOCK terminal on the rear panel
take priority over the ones input at the VIDEO AUX jacks.
• To reproduce the source signals input at these jacks, select
"V-AUX" as the input source.
SPEAKERS
1
PROGRAM
PHONES
TONE CONTROL STRAIGHT
STANDBY
/ON
SILENT CINEMA
EFFECT
VIDEO
S VIDEO
S
Game console or
video camera
indicates recommended connections
indicates alternative connections
(One for the video connection, and
one for the audio connection)
VOLUME
SCENE
2 3 4
INPUT
VIDEO AUX
PURE DIRECT AUDIO SELECT OPTIMIZER MIC
S VIDEO VIDEO L AUDIO
L OPTICAL
AUDIO R
V O
L R
R OPTICAL