Vauxhall Movano Owner's Manual page 151

150 Vehicle care
8. Connect the red < power supply
lead on the compressor to the
jump start terminal 3 155.
9. Connect the black ] power
supply lead to a vehicle grounding
point, such as the engine block or
an engine mounting bolt.
To avoid discharging the battery,
we recommend running the
engine.
10. Set the rocker switch on the
compressor to I. The tyre is filled
with sealant.
11. The compressor pressure gauge
briefly indicates up to 6 bar. Then
the pressure starts to drop.
12. All of the sealant is pumped into
the tyre. Then the tyre is inflated.
13. The prescribed tyre pressure
should be obtained within
10 minutes. Tyre pressure
3 182. When the correct pressure
is obtained, switch off the
compressor.
If the prescribed tyre pressure is
not obtained within 10 minutes,
remove the tyre repair kit. Move
the vehicle one tyre rotation
(approx. 2 metres). Reattach the
tyre repair kit and continue the
filling procedure for 10 minutes. If
the prescribed tyre pressure is still
not obtained, the tyre is too badly
damaged. Seek the assistance of
a workshop.
Drain excess tyre pressure with
the button above the pressure
indicator.
Do not run the compressor for
longer than 10 minutes.
14. Detach the tyre repair kit. Screw
the tyre inflation hose to the free
connection on the sealant bottle.
This prevents sealant from
escaping. Stow tyre repair kit
under the front seat.
15. Remove any excess sealant
using a cloth.
16. Take the label indicating
maximum permitted speed from
the tyre repair kit and affix in the
driver's field of view.