Number Plate Light - Vauxhall Movano Owner's Manual

140 Vehicle care
5. Replace bulb holder.
6. Replace the screw.
Centre high-mounted
brake light
1. Remove cover from the inside of
the rear door.
2. Unscrew the nut from the locating
pin at the rear of the lamp
assembly.
3. Remove the lamp assembly from
the aperture on the outer side.
4. Detach wiring connector from
lamp assembly.
5. Remove bulb holder from lamp
assembly and renew bulb.
6. Install bulb holder in lamp
assembly and reattach wiring
connector to lamp assembly.
7. Replace lamp assembly into
aperture, ensuring that it is seated
correctly.
8. Replace the nut onto the locating
pin on the rear of the lamp
assembly.
9. Install cover on the inside of the
rear door.

Number plate light

1. Unclip lens using a flat blade
screwdriver.
2. Remove cover and renew bulb.
3. Reinstall lens.