Side Turn Signal Lights - Vauxhall Movano Owner's Manual

7. Push bulb into socket slightly,
rotate anti-clockwise, remove and
renew bulb.
Turn signal light (1)
Tail and brake light (2)
Reverse light (3)
Rear fog light, may be on one side
only (4)
8. Replace bulb holder in lamp
assembly.
9. Replace the three screws on the
rear of the lamp assembly.
10. Reattach wiring connector to lamp
assembly.
11. Replace lamp assembly from the
outer side into original position,
ensuring that it is seated correctly.
12. Replace the two nuts onto the
locating pins on the rear of the
lamp assembly.
13. Install the upper and lower trim
panels to the rear pillar.

Side turn signal lights

1. Push the lamp assembly to the
right and pull at the left-hand side
of the lamp assembly to release
from the aperture.
2. Detach wiring connector from
lamp assembly.
3. Remove bulb holder from lamp
assembly by rotating 90° and
renew bulb.
4. Install bulb holder in lamp
assembly.
Vehicle care
5. Reattach wiring connector.
6. Install lamp assembly into
aperture and push to the left to
secure.
Mirror turn signal lights
1. Move the lower mirror assembly
from the front to access the screw.
2. Remove the screw using a torx
screwdriver.
3. Remove bulb holder from the rear
of the lower mirror assembly.
4. Renew bulb.
139