Manual Programming - Universal Remote Control Easy Clicker UR3-SR3 Operating Manual

DVD
Quick Number
0
1
2
3
4
5
6
7
8
9
C. Manual Programming
C. Manual Programming
The remote control can be programmed by entering a three-
digit code number that corresponds to particular brands and
models of equipment. The three-digit code numbers are listed
in the code tables sections of this instruction manual.
STEP1
Turn on the equipment that you want the remote
control to operate Cable Box, TV and DVD(VCR).
STEP2
Press the [DEVICE] button and the [OK/SEL]
button simultaneously for 10 seconds. The
corresponding device LED will turn on indicating
that it is ready to be programmed. The LED will
remain on for 20 seconds. The next step must be
entered while the LED is on.
STEP3
Point the remote control toward the equipment
and enter the three-digit code number assigned
to your brand from the code tables. If there are
more than one three-digit number listed for your
brand, try one code number at a time until your
equipment turns off.
*Note : You can verify that you have selected the correct
code by pressing the [MUTE] button. The
equipment should turn on or off.
STEP4
Store the three-digit code by pressing the same
[DEVICE] button once again. The device LED will
Manufacturer/Brand
HITACHI
SONY
PHILIPS
SAMSUNG
PHILIPS MAGNAVOX
PANASONIC
LG
JVC
DENON
PIONEER
4