Replacing Batteries - Universal Remote Control Easy Clicker UR3-SR2 Operating Manual

Introduction
1
This remote control is designed to operate most Digital
and Analog Cable Boxes, as well as TVs, and a VCR or
DVD player.

Replacing Batteries

2
Before you program or operate the remote control, you
must install two new AAA alkaline batteries.
STEP1
Remove the battery compartment cover from the
back of your remote control.
STEP2
Check battery polarity carefully, and install the
batteries as shown in the illustration below.
STEP3
Replace the battery compartment cover.
Install two
AAA alkaline batteries
as shown here
1