Operation Of Auto Hold Mode - UNI-T UT70C Operating Manual

Model UT70C: OPERATING MANUAL

Operation of Auto Hold Mode

Auto Hold means you no need to press HOLD, the
readings on the LCD will be hold automatically.
Conditions to enter Auto Hold Mode:
l
When input signal is larger than AC/DC 100mV,
Auto Hold mode will be enabled automatically.
l When the change of signal three times continuously
within 3 digits, it will hold the last value; the Meter
beeps.
l
Considers every value as the base value. When
the Meter detects an input which is above the base
value 300 digits, the Meter beeps, and holds and
displays the value as the new base value.
32