UNI-T UT70C Operating Manual page 11

Functional Buttons (2)
HOLD Any rotary
switch
position
Conductance
mode
A , mA
At OFF
position
Any rotary
REL
switch
position
Hz V , V
mV , A
mA
Display
Backlight
Model UT70C: OPERATING MANUAL
Press HOLD to enter and exit the
Hold mode in any mode; the
Meter beeps.
Press HOLD to toggle between
conductance and resistance
value. Present resistance value
is kept.
Press to select capacitance
test.
Press to select DC or AC
current. DC is default.
To disable the Sleep Mode, press
while turning on the Meter.
Press REL to enter and exit the
and % mode in any measuring
mode; the Meter beeps.
, 1. Press Hz to enter frequency
measurement mode; the
,
Meter beeps.
2. Press Hz again to enter duty
cycle measurement mode;
the Meter beeps.
3. Press Hz again to return to
the last measurement mode;
the Meter beeps.
Press once to turn the Display
Backlight on and it shall shut off
automatically in around 60
seconds later.
11