Pnp/Pci Setup; Resources Controlled By; Reset Configuration Data - TYAN Trinity 100AT S1590 User Manual

PnP/PCI Configuration
Note: This chapter describes all fields offered by Award Software in this
screen. Your system board designer may omit or modify some fields.
PNP OS Installed

Resources Controlled By

Reset Configuration Data

ACPI I.O Device Node
PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play aware (e.g.,
Windows 95).
Resources Controlled By
The Plug and Play EliteBIOS can automatically configure all the boot and Plug
and Play-compatible devices. If you select Auto, all the interrupt request (IRQ)
and DMA assignment fields disappear, because the BIOS automatically
assigns them.
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have installed a
new add-on and the system reconfiguration has caused such a serious conflict
that the operating system cannot boot.
S1590 Trinity 100AT
ROM PCI/ISA BIOS (2A5LET59)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
: No
CPU to PCI Write Buffer
: Auto
PCI Dynamic Bursting
: Disabled
PCI Master 0 WS Write
: Enabled
PCI Delay Transaction
PCI Master Read Prefetch
PCI#2 Access #1 Retry
AGP Master 1 WS Write
AGP Master 1 WS Read
PCI IRQ Activated By
Assign IRQ for USB
Assign IRQ for VGA
Assign IRQ for ACPI
51
ESC : Quit -¯ ®¬
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: Enabled
: Disabled
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Level
: Enabled
: Disabled
: IRQ 10
: Select Item